Explore our high-efficiency step-down and step-up oil-immersed & pad-mounted transformers designed for Ghana’s industrial, commercial, and utility electrification initiatives.
Ghana’s national electrical power network is currently undergoing an ambitious modernization campaign. Managed at the transmission high-voltage level by the Ghana Grid Company (GRIDCo) and distributed primarily by the Electricity Company of Ghana (ECG) in the southern sectors and the Northern Electricity Distribution Company (NEDCo) in the north, 33kV primary distribution voltage serves as the backbone for regional power routing. Stepping down 33kV sub-transmission power directly to 11kV secondary lines or 415V/240V low-voltage utilization circuits requires rugged, high-reliability distribution transformers capable of handling tropical grid stresses.
Industrial expansion under the Ghanaian Government’s "One District, One Factory" (1D1F) initiative, combined with rapid urban developments in Greater Accra, Kumasi, and Takoradi, has intensified load demands on regional substations. Electrical procurement teams in Ghana face dual challenges: high ambient operating temperatures coupled with severe seasonal environmental threats such as the dry, dust-laden Harmattan wind and high-coastal salinity along the Gulf of Guinea. Chetan Electric’s customized 33kV power distribution transformers are purpose-built to solve these localized challenges, ensuring uninterrupted continuous duty across public utility lines and private industrial networks.
Our technical design adheres to international electro-technical standards including IEC 60076, BS 171, and IS 2026/1180, verified through stringent type-testing at the Central Power Research Institute (CPRI).
Constructed from prime-grade, Cold-Rolled Grain-Oriented (CRGO) silicon steel laminations (M3/M4/Hi-B grades). Precision step-lap miter mitering reduces no-load losses and acoustic noise levels, ensuring compliance with strict Energy Commission of Ghana efficiency standards.
Utilizes electrolytic High-Conductivity Copper (99.9% purity) with thermally upgraded paper insulation. Multiple layer coils with continuous radial/axial cooling ducts ensure optimum thermal dissipation under peak loading conditions in tropical climates.
Tank structures are shot-blasted and coated with C5-M marine-grade polyurethane paint systems to resist coastal salt spray in Tema/Takoradi. Fully sealed corrugated tanks or radiator banks prevent dust ingestion during Harmattan seasons.
| Technical Parameter | 33kV Distribution Standard Spec | Custom Industrial Option |
|---|---|---|
| Rated Power Range | 50 kVA – 2500 kVA (Step-down distribution) | 3150 kVA – 5000 kVA (Substation Power) |
| Primary (HV) Voltage | 33 kV / 34.5 kV (BIL 170 kV) | Dual HV Switching (33kV / 11kV) |
| Secondary (LV) Voltage | 415V (3Ph, 4-Wire) / 11kV | 220V, 400V, 6.6kV or Custom Dual LV |
| Cooling Type | ONAN (Oil Natural Air Natural) | ONAF (Forced Air) / Synthetic Ester Oil |
| Tap Changer Mechanism | Off-Circuit Tap Changer (OCTC) ±2.5%, ±5% | On-Load Tap Changer (OLTC) with RTCC panel |
| Winding Material | Electrolytic Copper Wire/Foil | High-Grade Electrical Aluminum (Optional) |
| Bushings & Terminations | Outdoor Porcelain Bushings (Extended Creepage) | Plug-in Type Elbow Connectors / Cable Boxes |
How Chetan Electric's custom transformer configurations solve operational and environmental challenges in key Ghanaian industries.
Ghana is Africa’s top gold producer. Mining operations require continuous heavy step-down transformers capable of resisting severe harmonic distortion caused by variable speed drives and large crushing equipment. Chetan Electric supplies heavy-duty 33kV/11kV and 33kV/415V transformers with reinforced K-factor rating, electrostatic shielding, and high mechanical withstand strength against operational short-circuits.
Agricultural processing hubs—including cocoa processing, oil palm extraction, and grain storage across Ashanti and Western North regions—demand uninterrupted seasonal power. Our ONAN cooling oil-immersed transformers utilize high thermal capacity mineral oil and automatic voltage relay (AVR) controls to compensate for rural grid voltage fluctuations, avoiding factory downtime.
Operating in maritime coastal zones introduces aggressive salt spray corrosion, which deteriorates standard transformer tanks within years. We engineer 33kV transformers with C5-M anti-corrosion exterior coatings, stainless steel hardware, and extended creepage distance bushings (31mm/kV) to prevent flashovers caused by sea-salt buildup at Tema Port and Accra metropolitan projects.
As Ghana pushes to increase renewable generation to 10% of its energy mix, utility-scale solar projects in Northern Ghana require step-up transformers that interface solar inverters with the 33kV NEDCo feeder grid. We offer specialized step-up transformers with multiple low-voltage inputs, bi-directional power flow capability, and Harmattan-proof hermetic sealing.
Modernization, loss reduction, and smart grid adoption define the procurement landscape for power equipment in West Africa.
Ghana is targeting universal electricity access. Connecting remote communities to the national grid requires robust 33kV single-phase and three-phase pole-mounted and ground-mounted transformers capable of maintenance-free operation over 25+ years.
Commercial hubs and high-density residential towers in central Accra are increasingly specifying synthetic and natural ester oil-filled transformers. Ester oils offer high flash points (>300°C) and full biodegradability, reducing fire hazard risks in urban substations.
To curb technical and commercial losses, distribution companies are adopting smart transformers equipped with online Dissolved Gas Analysis (DGA), oil temperature indicators (OTI), and winding temperature indicators (WTI) with RS485 SCADA output communications.
Founded in 1994, Chetan Electric Pvt. Ltd. is an ISO 9001:2015 certified transformer manufacturer based in Bangalore, India. With over 30 years of engineering excellence, we specialize in high-efficiency oil-immersed and dry-type distribution and power transformers up to 5000 kVA at 33kV class.
Our manufacturing facility features automated winding machines, vacuum drying ovens, and an in-house high-voltage testing laboratory. Every unit shipped to Ghana undergoes comprehensive routine testing in accordance with IS 2026 / IEC 60076 standards. Furthermore, our designs are type-tested for impulse withstand and short-circuit capability at the premier Central Power Research Institute (CPRI).
Answers to essential technical, regulatory, and logistics queries from electrical contractors, engineers, and utility buyers in Ghana.
Consult with our senior electrical engineering team today. We provide full technical proposals, single-line diagrams (SLD), and competitive FOB/CIF Tema Port pricing within 24 business hours.
Contact Us